In this activity, students investigate different methods (aeration and filtering) for removing …
In this activity, students investigate different methods (aeration and filtering) for removing pollutants from water. They will design and build their own water filters.
This activity is a field investigation where students will observe three areas …
This activity is a field investigation where students will observe three areas with high sensitivity to pollution, and test water quality in two of the locations.
The IceCube VR experience puts you in the role of an astrophysicist …
The IceCube VR experience puts you in the role of an astrophysicist who journeys deep into space to track down the source of a neutrino detected by the IceCube observatory in Antarctica. At the research station at the South Pole, you will see the large instrument, buried in the ice, detect a mesage from across the universe. Using your “impossibility drive,” you will follow the neutrinos path back to the black hole it was emitted from. Along the way, you will be able to take in awe inspiring views from the edge of the solar system, looking back from the milky way and dangerously close to a black hole. You will be able to see using not only your normal visible spectrum, but also using X-ray vision and neutrino vision, revealing entirely different views of space.
With a simple demonstration activity, students are introduced to the concept of …
With a simple demonstration activity, students are introduced to the concept of friction as a force that impedes motion when two surfaces are in contact. Then, in the Associated Activity (Sliding and Stuttering), they work in teams to use a spring scale to drag an object such as a ceramic coffee cup along a table top or the floor. The spring scale allows them to measure the frictional force that exists between the moving cup and the surface it slides on. By modifying the bottom surface of the cup, students can find out what kinds of surfaces generate more or less friction. They also discover that both static and kinetic friction are involved when an object initially at rest is caused to slide across a surface.
This activity is an outside the classroom teaching with data experiment. It …
This activity is an outside the classroom teaching with data experiment. It allows students to collect and analyze data in ordet to create a distance versus time graph and calculate average velocity from the graph.
Students will become familiar with the properties of magnets. They will design …
Students will become familiar with the properties of magnets. They will design a data collection sheet to show where magnets are hidden in a closed box with their explanation of their findings. They will also design a game or activity using magnets and present their activity to the class.
Students demonstrate the erythrocyte sedimentation rate test (ESR test) using a blood …
Students demonstrate the erythrocyte sedimentation rate test (ESR test) using a blood model composed of tomato juice, petroleum jelly and olive oil. They simulate different disease conditions, including rheumatoid arthritis, anemia, leukocytosis and sickle-cell anemia, by making appropriate variations in the particle as well as in the fluid matrix. Students measure the ESR for each sample blood model, correlate the ESR values with disease conditions and confirm that diseases alter blood composition and properties. During the activity, students learn that when non-coagulated blood is let to stand in a tube, the red blood cells separate and fall to the bottom of the tube, resulting in a sediment and a clear liquid called serum. The height in millimeters of the clear liquid on top of the sediment in a time period of one hour is taken as the sedimentation rate. If a disease is present, this ESR value deviates from the normal, disease-free value. Different diseases cause different ESR values because blood composition and properties, such as density and viscosity, are altered differently by different diseases. Thus, the ESR test serves as a real-world diagnostic screening test to identify indications of the presence of any diseases in people.
This activity/experiment asks kids to dissolve M&Ms in different liquids: water, oil, …
This activity/experiment asks kids to dissolve M&Ms in different liquids: water, oil, and rubbing alcohol. In each liquid, the coating of the M&Ms will dissolve at different rates.
In this physics lab students will investigate whether Ohm's Law applies to …
In this physics lab students will investigate whether Ohm's Law applies to common electric devices (incandescent light bulbs and LEDs). This activity is based on a PRISMS activity.
A collection of repeat photography of glaciers from the National Snow and …
A collection of repeat photography of glaciers from the National Snow and Ice Data Center (NSIDC). The photos are taken years apart at or near the same location, and at the same time of year. These images illustrate how dramatically glacier positions can change even over a relatively short period in geological time: 60 to 100 years. Background essay and discussion questions are included.
This video provides a good introduction to the field of attribution science. …
This video provides a good introduction to the field of attribution science. Beginning with an introduction to weather and climate, it describes how severe weather might be linked to climate change and the science behind attribution studies. It gives a good explanation behind how scientists use climate models to study whether severe weather events were influenced by climate change. It also discusses the question, "does climate change cause extreme weather?" and provides an introduction to the concepts of probability, causation, and correlation in regards to attribution science (how much climate change influenced an event verses normal variations in weather).
Using the same method for measuring friction that was used in the …
Using the same method for measuring friction that was used in the previous lesson (Discovering Friction), students design and conduct experiments to determine if the amount of area over which an object contacts a surface it is moving across affects the amount of friction encountered.
Students gain an understanding of the factors that affect wind turbine operation. …
Students gain an understanding of the factors that affect wind turbine operation. Following the steps of the engineering design process, engineering teams use simple materials (cardboard and wooden dowels) to build and test their own turbine blade prototypes with the objective of maximizing electrical power output for a hypothetical situation—helping scientists power their electrical devices while doing research on a remote island. Teams explore how blade size, shape, weight and rotation interact to achieve maximal performance, and relate the power generated to energy consumed on a scale that is relevant to them in daily life. A PowerPoint® presentation, worksheet and post-activity test are provided.
This is an inquiry-based activity in which students will need to work …
This is an inquiry-based activity in which students will need to work together as a class to solve the following problem: they must construct a "boat" entirely out of modeling clay that is capable of supporting 150 grams of cargo without sinking.
No restrictions on your remixing, redistributing, or making derivative works. Give credit to the author, as required.
Your remixing, redistributing, or making derivatives works comes with some restrictions, including how it is shared.
Your redistributing comes with some restrictions. Do not remix or make derivative works.
Most restrictive license type. Prohibits most uses, sharing, and any changes.
Copyrighted materials, available under Fair Use and the TEACH Act for US-based educators, or other custom arrangements. Go to the resource provider to see their individual restrictions.
